重庆大学土木工程学院欢迎您! English 教师登录
当前位置: 首页 > 师资队伍 > 副教授 > 正文 >

个人简介

同济大学和帝国理工学院(2025年QS排名世界第2)联合培养博士,现为重庆大学副教授,博士生导师/博士后合作导师。主持和参与国家自然科学基金创新群体项目、国家自然科学基金重大研究计划项目、国家自然科学基金面上项目、国家自然科学基金青年项目以及工程咨询项目10项;已以第一或独立通讯作者发表SCI期刊论文多篇,申请专利和软件著作权多项、参编国家标准1部、主编协会标准1部、参编协会及地方标准各1部、参编教材3本(其中1本为国家级规划教材)。


研究方向
新材料与新结构方向:模块化集成建筑(MiC)、索膜(ETFE)结构;  
计算机学科交叉方向:智能检测与三维重建(计算机视觉)、工程结构多目标优化(智能算法);  
结构加固与城市更新方向:索支撑加固技术、直剪锚栓加固技术等。

主讲课程
本科生——《建筑钢结构》、《结构检测与鉴定》  
硕士和博士生——《大跨及空间结构》、《高等钢结构理论》

学术兼职
国际薄壳与空间结构学会(IASS)会员;  
中国钢结构协会预应力结构分会第六届理事会理事;  
中国土木工程学会混凝土及预应力混凝土分会第九届理事会理事;  
中国建筑金属结构协会铝结构分会第一届理事会理事;  
重庆市房屋市政工程安全和应急管理专家;  
《建筑结构学报》中青年审稿专家;  
重庆市房屋市政工程质量和应急管理专家;  
Engineering Structures等十多个SCI期刊审稿人。

主要成果
(一)科研项目  
国家自然科学基金面上项目,主持,在研  
国家自然科学基金青年项目,主持,结题  
国家自然科学基金重大研究计划项目,参与,结题  
重庆市留学人员回国创业创新支持计划,主持,结题  
重庆市科技计划项目基础科学与前沿技术研究专项,主持,结题  
中央高校基本科研业务费“基础与前沿交叉专项”项目,主持,结题  
(二)近3年代表性论文  
2025年  
1. PC Li, JX Yang(学生), XY Quan, et al. Study of the shear performance of low shear-to-span ratio concrete beams reinforced with direct-shear-bolted plate. Structures. 2025. (Accepted, 一区)  
2. PC Li, G Ye(学生), SR Zhou, et al. Experimental and numerical study on the bending performance of a novel steel-timber gusset joint. Engineering Structures. 2025. (Accepted, 一区)  
3. PC Li, TL Peng(学生), G Ye, et al. A novel integrated algorithm for multi-objective optimization of prestressed stayed steel columns. Thin-Walled Structures. 2025. (Accepted, 一区)  
4. GH Chen(学生), PC Li, TH Zhang, et al. Experimental and numerical research of novel inter-module self-locking connection on bending resistance. Journal of Constructional Steel Research. 2025. (Accepted, 一区)  
5. G Ye(学生), TL Peng, PC Li, et al. Optimization of Prestressed Stayed H-section Steel Columns: A Nonlinear Buckling Driven Approach. Journal of Constructional Steel Research. 2025. (Accepted, 一区)  
6. PC Li, HZ Zhou(学生), Ke Yu, et al. Shape optimization and buckling analysis of cable-stiffened prestressed latticed shells. International Journal of Structural Stability and Dynamics. 2025. (Accepted, 二区)  
7. PC Li, MY Huang(学生), YY Shang(学生), et al. Study on mechanical properties of corse-fine polypropylene fiber blended concrete. Buildings. 2025. (Accepted, 二区)  
8. PC Li, MY Huang(学生), XY Quan, et al. Experimental and numerical investigation into the tensile performance of a novel self-adaptive grouting evolved sleeve. Structures, 2025, 80: 109738. (一区)  
9. PC Li, H Li(学生), TH Zhang, et al. Experimental investigation and numerical study of all-steel buckling-strained braces. Structures, 2025, 77: 109228. (一区)  
10. PC Li, HZ Zhou(学生), SR Zhou, et al. Investigation into bending performance of a novel aluminium-timber gusset joint. Structures, 2025, 74: 108520. (一区)  
11. PC Li, H Li(学生), GH Chen(学生), et al. Axial tensile performance and stiffness prediction of novel self-locking modular connections: Experimental, numerical and theoretical investigation. Engineering Structures, 2025, 343: 121044. (一区)  
12. PC Li, WT Li(学生), Y Zhao, et al. Experimental and numerical study into seismic performance of novel cable-stiffened latticed shells. Journal of Constructional Steel Research, 2025, 232: 109614. (一区)  
13. SS Song(学生), GH Chen(学生), PC Li, et al. Investigation into wind resistance performance of cable-stiffened spherical latticed shells. Journal of Constructional Steel Research, 2025, 229: 109507. (一区)  
14. PC Li, H Li(学生), SS Song, et al. Seismic response analysis of cable-stiffened latticed shells with buckling-restrained braces. Journal of Constructional Steel Research, 2025, 228: 109437. (一区)  
15. PC Li, SB Chu(学生), S Qin, et al. Optimisation of prestressed staved steel columns based on strengthen elitist genetic algorithm. Journal of Constructional Steel Research, 2025, 227: 109324. (一区)  
2024年  
1. GH Chen(学生), PC Li, H Bao, et al. Design method for axially compressed H-sectional aluminium alloy slender column based on CSM. Thin-Walled Structures, 2024, 205: 112417. (一区)  
2. SS Song(学生), Y Zhao(学生), F Liang, PC Li,et al. Optimization of lower suspension point position in attached cantilever scaffold. Buildings, 2024, 14(9): 2592. (二区)  
3. Y Zhao(学生), GH Chen(学生), SS Song, et al. Research on wind resistance optimization method for cable stiffened single-layer spherical reticulated shell based on QPSO algorithm. Buildings, 2024, 14(8): 2474. (二区)  
4. Y Zhao(学生), JX Hu, SS Song, et al. Global stability behavior of pre-cast cable-stiffened steel columns. Buildings, 2024, 14(8): 2485. (二区)  
5. PC Li, MY Huang(学生), TH Zhang, et al. Global stability analysis of a cable-stiffened glulam-latticed shell. Structures, 2024, 67: 106944. (一区)  
6. PC Li, GH Chen(学生), H Ding, et al. An improved CSM-based design method for H-section aluminium slender columns under eccentric compression. Engineering Structures, 2024, 317: 118673. (一区)  
7. PC Li, GH Chen(学生), YQ Luo(学生), et al. Seismic behavior analysis of cable-stiffened cylindrical latticed shells. Journal of Constructional Steel Research, 2024, 219: 108786. (一区)  
8. ZY Zhang(学生), PC Li, TH Zhang, et al. Dynamic behavior of cable-stiffened cylindrical single-layer latticed shell based on shaking table tests. Structures, 2024, 66: 106857. (一区)  
9. ZY Zhang(学生), PC Li, CL Liu, et al. Stability of prestressed stayed steel columns under eccentric compression. International Journal of Structural Stability and Dynamics, 2024, 25(14): 2550144. (二区)  
10. Y Zhao(学生), ZY Zhang(学生), PC Li, et al. Experimental study on small-scale shake table testing of cable-stiffened single-layer spherical latticed shell. Buildings, 2024, 14(6): 1826. (二区)  
11. LK Shi(学生), PC Li, CR Liu, et al. An improved tensile strength and failure mode prediction model of FDM 3D printing PLA material: Theoretical and experimental investigations. Journal of Building Engineering, 2024, 90: 109389. (一区)  
12. PC Li, GH Chen(学生), JY Qiu, et al. Experimental and numerical investigation into the load-carrying capacity of aluminium alloy H-sectional stocky columns under axial compression. Journal of Building Engineering, 2024, 87: 108777. (一区)  
13. PC Li, GH Chen(学生), HX Lu, et al. Dynamic responses of single-layer reticulated shells under oblique impact loading. Buildings, 2024, 14(3): 633. (二区)  
2023年  
1. PC Li, XX Zhao(学生), DS Ding, et al. Optimization design for steel trusses based on a genetic algorithm. Buildings, 2023, 13(6): 1496. (二区)  
2. B Jian, XX Weng(学生), Y Lin(学生), PC Li. Study on the seismic performance of prestressed steel-concrete Vierendeel truss transfer story frame. Structures, 2023, 57: 105123. (一区)  
3. TX Pi, J Gan(学生), PC Li, et al. Axial restraint performance of small span-to-depth ratio coupling beams reinforced with diagonal and rhombic bars. Structures, 2023, 55: 1219-1234. (一区)  
4. H Wang, JL Li(学生), PC Li, et al. Study on flexural performance of aluminum alloy gusset joints subjected to bending moment and shear force. Materials, 2023, 16(7): 2920. (一区)

获奖情况
华夏建设科学技术奖三等奖,2024年  
重庆市土木建筑学会优秀青年人才,2023年  
第三届全国土木工程专业青年教师教学大赛二等奖,2022年  
重庆大学优秀党务工作者,2022年  
重庆大学优秀党务工作者,2021年  
重庆大学优秀党务工作者,2020年  
浙江城建奖教金,2019年

研究生培养
(一)培养方式  
亲自指导学生、每周一次例会制度、团队氛围好;资助学生参加国内、外学术交流(不限次数);已毕业的所有学生均发表有SCI期刊论文。  
(二)学生就业  
学生就业情况好,已毕业学生的主要就业去向包括:  
政府部门——交通局、建设局和质检站等;  
事业单位——军工研究院等;  
大型央、国企——中建总部、中建国际、水利集团等;  
高校——中国人民解放军国防大学等;  
继续深造——境内外读博。  
(三)学生获奖  
2023年硕士生赵旭湘获研究生国家奖学金(发表3篇SCI论文);  
2024年硕士生陈郭涵获研究生国家奖学金(发表9篇SCI论文);  
2024年硕士生张致宇获研究生国家奖学金(发表3篇SCI论文);  
2025年曾虹铭获重庆大学优秀毕业论文;  
2025年黄彦博获重庆市优秀毕业论文;  
指导学生获得第十二届全国大学生结构设计大赛特等奖(全国唯一);  
指导学生获得第一届重庆市大学生结构设计大赛特等奖(全市唯一);  
2025届所有毕业生论文盲审结果均为“优秀”。

联系方式
欢迎踏实上进、富有创新精神的学生加入!  
通信地址:重庆市沙坪坝区沙北街83号  
E-mail:lipengcheng@cqu.edu.cn