教学科研机构

康少波，男，河北赵县人，重庆大学“百人计划”学者，研究员，博士生导师。2016年博士毕业于新加坡南洋理工大学，后返回重庆大学开展博士后研究工作。2018年作为“百人计划”学者、研究员入职重庆大学。长期从事钢筋混凝土结构和装配式混凝土结构抗连续倒塌性能与设计方法、高性能混凝土材料力学性能方面的科研和教学工作。主持和参研国家自然科学基金面上项目、国家自然科学基金青年基金、重庆市基础与前沿研究计划、重庆市自然科学基金面上项目等10余项省部级科研项目。发表SCI期刊论文60余篇，其中以第一或通讯作者发表文章50余篇。获得高等学校科学研究优秀成果奖二等奖（排名第三）。入选全球前2%顶尖科学家（Singleyr）。
工作经历
2018/3-至今        重庆大学，土木工程学院，“百人计划”学者，特聘研究员，博士生导师
2016/2-2018/2    重庆大学，土木工程学院， “国际交流计划”博士后
2015/1-2016/2    新加坡南洋理工大学，土木与环境工程学院，Research Associate
2010/7-2011/1    新加坡南洋理工大学，土木与环境工程学院，Project Officer
教育背景
2011/1-2015/1    新加坡南洋理工大学，土木与环境工程学院，博士
2007/9-2010/6    重庆大学，土木工程学院，硕士
2003/9-2007/6    重庆大学，土木工程学院，学士

高性能钢结构整体稳定性能
锈蚀钢构件承载力评估
山地典型建筑结构防灾性能及设计方法
高延性水泥基复合材料力学性能
现代竹木结构体系受力性能

研究生阶段：《高等钢结构理论》（全英文）（重庆大学研究生全英文授课精品课程、重庆市研究生教育“课程思政”示范课程）
                     《高等混凝土理论》（全英文）
本科生阶段：《混凝土结构基本原理》

中国建筑学会抗震防灾分会建筑抗倒塌专业委员会委员
中国地震学会基础设施防震减灾青年委员会委员
美国混凝土协会会员
国际材料与结构研究实验联合会会员
国家自然科学基金委通讯评审专家
国家留学基金委通讯评审专家
SCI学术期刊Journal of Structural Engineering、Engineering Structures、ACI Structural Journal、Journal of Building Engineering、Construction and Building Materials、Journal of Building Engineering、Journal of Materials in Civil Engineering审稿人

主持/主研科研项目
[1] 国家自然科学基金面上项目，山地掉层钢筋混凝土框架抗连续倒塌损伤演化及空间协同工作效应研究，52278145，2023年1月-2026年12月
[2] 国家自然科学基金青年项目，考虑梁轴力的钢筋混凝土框架抗连续倒塌性能试验研究及理论分析，51608068，2017年1月-2019年12月
[3] 国家自然科学基金面上项目，钢框架-组合楼板结构的落层冲击倒塌机理研究，51778086，2018年1月-2021年12月
[4] 国家自然科学基金项目专项项目，国家自然科学基金委员会第二届土木工程青年论坛，51942805，2019年8月-2020年7月
[5] 重庆市自然科学基金面上项目，山地城镇掉层钢筋混凝土框架鲁棒性研究，cstc2021jcyj-msxmX0357，2021年10月-2024年9月
[6] 重庆市基础与前沿研究计划一般项目，考虑梁悬链线效应的钢筋混凝土柱抗连续倒塌性能研究，cstc2016jcyjA0450，2016年7月-2019年6月
[7] 重庆市自然科学基金面上项目，反复撞击作用下山地组合框架底层柱损伤机理及抗撞性能评估方法，cstc2020jcyj-msxmX0010，2020年7月-2023年6月
[8] 贵州省科技计划项目，贵州省“一带一路”绿色装配式建筑产业化国际科技合作基地，HZJD[2023]001，2024年1月-2026年12月
[9] 贵州省科技计划项目，贵州省国际装配式建筑技术科技创新人才团队建设，CXTD[2023]022，2023年12月-2026年12月
[10] 中国博士后科学基金第59批面上资助，一等资助，2016M590863
[11] 重庆市博士后科研项目特别资助项目二等资助，Xm2017036
[12] 出站留（来）渝博士后择优资助，钢筋混凝土结构抗连续倒塌性能，2018LY52，2019年1月-2021年12月
[13] 建筑结构加固改造与地下空间工程教育部重点实验室开放基金，多高层重木结构中钢胶木复合连接件的受力机理与设计方法研究，Z20230373，2023年1月-2025年12月
[14] 陕西省混凝土结构安全与耐久性重点实验室开放基金，钢筋混凝土框架抗连续倒塌理论计算方法研究，XJKFJJ201801，2019年1月-2020年12月
期刊论文
2024年：
[1] Liu K., Ding J.-X., Gao C.-Q., Yuan J., Kang S.B.* (2024). “Experimental and numerical investigations on impact response of reinforced concrete beams with a sandwich panel protective layer.” Engineering Structures.
[2] Kang S.B., Yu X.-F., Jia W.-Y., Zhou S.-R.*, Long B. (2024). “Flexural behaviour of built-up I-shaped bamboo scrimber beams: experimental tests and design method.” Wood Material Science and Engineering.
[3] Long X, Iyela P.M., Su Y., Atlaw M.M., Kang S.B.* (2024). “Numerical predictions of progressive collapse in reinforced concrete beam-column sub-assemblages: A focus on 3D mesoscale modeling.” Engineering Structures. 315, 118485.
[4] Gao S., Yang J., Kang S.B.*, Li F., Shi X. (2024). “Experimental and numerical studies on deformation performance of square concrete-filled steel tubular columns under repeated lateral impacts.” Engineering Structures, 308, 117909.
[5] Huang X., He S.-Y., Liu X.-Y., Kang S.B.* (2024). “Compression behaviour of Q355 steel equal-leg angles with simulated local defects.” Journal of Constructional Steel Research, 217, 108673.
[6] Kang S.B., Yu X.-F., Xiong J., Zhou S.-R.*, Long B. (2024). “Behaviour of exterior bamboo scrimber I-beam-box-column connections under reversed cyclic loading.” Structures, 62, 106173.
[7] Long X., Li H., Iyela P.M., Kang S.B.* (2024). “Predicting the bond–slip behavior of steel reinforcement in concrete under static and dynamic loadings by finite element, deep learning and analytical methods.” Engineering Failure Analysis, 161, 108312.
[8] Ma R., Wang X., Du Y.*, Sun G., Kang S.B., Ma J., Chen Z. (2024). “Experimental and theoretical investigation into flexural performance of thin-walled steel-laminated bamboo lumber truss beam.” Thin-Walled Structures, 199, 111841.
[9] Zhang Y.S., Liu Y.*, Sun X.D., Zeng W., Xing H.P., Lin J.Z., Kang S.B., Yu L. (2024). “Application of microbially induced calcium carbonate precipitation (MICP) technique in concrete crack repair: A review.” Construction and Building Materials, 411, 134313.
2023年：
[1] Feng Y., Sui L., Li Y.-M., Liao X.-D., Kang S.B.*, Nie S.-D. (2023). “Axial compression behaviour of welded high-strength H-columns Experimental tests and numerical simulations.” Case Studies in Construction Materials, 19, e02431.
[2] Fu Q.-L., Kang S.B., Wang D.-D.* (2023). “Numerical Modeling and Design Method for Reinforced Polyvinyl-Alcohol-Engineered Cementitious Composite Beams in Bending.” Sustainability, 15, 13, 10130.
[3] Li Z.-Y.*, Kang S.B., He H., Lu W.-Q., Liu H.-J., Lu C.-J. (2023). “Seismic behaviour of precast concrete beam-column connections with bolted end plates.” Structures, 58, 105343.
[4] Liu K., Kang S.B., Gao S.* (2023). “Experimental and analytical study on impact response of stainless steel-aluminium foam-alloy steel sandwich panels.” International Journal of Impact Engineering, 179, 104661.
[5] Peng J., Kang S.B., Shi L.-L., Yu X.-F., Zhou S.-R.*, Xiong G. (2023). “Local buckling resistance of bamboo scrimber plates in compression.” Case Studies in Construction Materials, 18, e02146.
[6] Peng J., Wang D.-D., Kang S.B., Zhou S.-R.* (2023), “A Simplified Method for Predicting Bond-Slip Behaviour of Ribbed Bars and Threaded Rods Glued in Glulam.”, Materials, 16, 15, 5370.
[7]. Kang S.B., Ding J.-X., Xiong J., Long B., Zhou S.-R*. (2023). “Behaviour of bamboo scrimber I-beam-box-column connections under static loads.” Engineering Structures, 286, 116076.
[8]. Gao S., Bai Q., Guo L., Kang S.B.* (2023). “Interface shear resistance of steel-concrete composite beams using U-bolt shear connectors.” Engineering Structures, 286, 116126.
[9]. Liu K., Liu C.-X., Liu Y., Wang R.-Y., Kang S.B.* (2023). “Experimental and Analytical Investigations on Tension-Stiffening of Reinforced Engineered Cementitious Composites Members.” Structures, 48, 976-988.
[10]. Fu Q.-L., Tan L., Long B.*, Kang S.B. (2023). “Numerical investigations of progressive collapse behaviour of multi-storey reinforced concrete frames.” Buildings, 13(2), 533.
[11]. Wang D.-D., Li J.-Z., Qin S.-D., Liu C.-X., Long B., Kang S.B.* (2023). “Experimental tests and analytical model for reinforced polyvinyl alcohol-engineered cementitious composite beams in bending.” Structural Concrete, 24(3), 3520-3544.
[12]. Xu H.-Y., Wang D.-D., Wang R.-Y., Kang S.B., Liu K.* (2023). “Experimental studies on tensile behaviour of reinforced engineered cementitious composite members with double steel rebars.” Structural Concrete, 24(4), 5522-5537.
[13]. Zhou S.-R., Shi L.-L., Xiong G., Kang S.B.*, Qin Y.-L., Yan H.-Q. (2023). “Global buckling behaviour of bamboo scrimber box columns under axial compression: Experimental tests and numerical modelling.” Journal of Building Engineering, 63, 105435.
2022年：
[1]. Kang S.B., Xiong G., Zhu H., Feng S.-Y., Zhou S.-R.* (2022). “Behaviour of Glulam Timber Frames with Different Beam-Column Connections under Reversed Cyclic Loads.” Journal of Building Engineering, 49, 104031.
[2]. Gao S., Zhou L., Guo L., Xu M.*, Kang S.B. (2022). “Mechanical performance degradation of recycled glulam under simulated marine atmosphere.” Construction and Building Materials, 346, 128443.
[3]. Gao S., Bai Q., Guo L., Kang S.B.*, Derlatka A., Deng S. (2022). “Study on flexural behavior of spliced shallow composite beams with different shear connectors.” Engineering Structures, 253, 113816.
[4]. Xiong G., Feng Y., Liao X.-D., Gu Y., Kang S.B.* (2022). “Lateral-Torsional Buckling Behaviour of Welded Q690 Steel I-Beams with Double Lateral Restraints along the Length.” Thin-Walled Structures, 170, 108659.
2021年：
[1]. Zhou Z., Sofi M.*, Sabri Y., Liu J., Kang S.B., Mendis P. (2021). “Microstructural Investigation of High-Volume Fly Ash Composites Containing Nano-Calcium Silicate Hydrate Crystals.” Journal of Materials in Civil Engineering, 33(12), 04021356.
[2]. Long X., Wang S., Huang X.-J., Li C., Kang S.B.* (2021). “Progressive Collapse Resistance of Exterior Reinforced Concrete Frames and Simplified Method for Catenary Action.” Engineering Structures, 249, 113316.
[3]. Wang D.-D., Shi Q.-Q., Wang Y.-X., Kang S.B.* (2021). “Evaluation of Bond-Slip Behaviour of Reinforcement in Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC).” Structural Concrete, 2021, 1-16.
[4]. Zhou S.-R., Li Z.-Y., Feng S.-Y., Zhu H., Kang S.B.* (2021). "Effects of Bolted Connections on Behaviour of Timber Frames under Combined Vertical and Lateral loads." Construction and Building Materials, 293, 123542.
[5]. Wang S., Kang S.B., Fu Q.-L., Ma J.*, Ziolkowski P. (2021). "Analytical Approach for Membrane Action in Laterally-Restrained Reinforced Concrete Square Slabs under Uniformly Distributed Loads." Journal of Building Engineering, 41, 102427.
[6]. Xiong G., Feng Y., Peng Q., Kang S.B.*, Zhang Y., Fan Y.-L. (2021). "Lateral-Torsional Buckling Behaviour of 690 MPa High Strength Steel Beams without Lateral Restraints." Structures, 33, 3999-4010.
[7]. Ma J., Kang S.B.*, Li B. (2021). "Influence of shear span ratio on the seismic performance of L-shaped RC walls." Magazine of Concrete Research, 73(1), 32-44.
2020年：
[1]. Kang S.B., Wang S., Long X., Wang D.-D., Wang C.-Y.* (2020). "Investigation of Dynamic Bond-Slip Behaviour of Reinforcing Bars in Concrete." Construction and Building Materials, 262, 120824.
[2]. Long X., Wang C.Y., Zhao P.Z., Kang S.B.* (2020). "Bond Strength of Steel Reinforcement under Different Loading Rates." Construction and Building Materials, 238, 117749.
[3]. Peng J., Zhao P.Z., Wang S., Lee S.W., Kang S.B.* (2020). "Interface Shear Transfer in Reinforced Engineered Cementitious Composites under Push-Off Loads." Engineering Structures, 206, 110013.
[4]. Kang S.B., Wang S., Gao S.* (2020). "Analytical Study on One-Way Reinforced Concrete Beam-Slab Sub-Structures under Compressive Arch Action and Catenary Action." Engineering Structures, 206, 110032.
[5]. Kang S.B.*, Wang S. (2020). "Design Approach for Compressive Arch Action in Reinforced Concrete Beams." ACI Structural Journal, 117(1), 197-206.
2019年：
[1]. Wang S., Kang S.B.* (2019). "Analytical Investigation on Catenary Action in Axially-Restrained Reinforced Concrete Beams." Engineering Structures, 192, 145-155.
[2]. Wang S., Peng J., Kang S.B.* (2019). "Evaluation of Compressive Arch Action of Reinforced Concrete Beams and Development of Design Method." Engineering Structures, 191, 479-492.
[3]. Yang B., Zhang Y., Xiong G., Elchalakani, M., Kang, S.B.* (2019). "Global Buckling Investigation on Laterally-Unrestrained Q460GJ Steel Beams under Three-Point Bending." Engineering Structures, 181, 271-280.
[4]. Wang S., Kang S.B., Tan K.H.* (2019). "Evaluation of bond-slip behaviour of embedded rebars through control field equations." Magazine of Concrete Research, 71(17), 907-919.
[5]. Lin S.C., Yang B., Kang S.B., Xu S.Q.* (2019). "A new method for progressive collapse analysis of steel frames." Journal of Constructional Steel Research, 153, 71-84.
2018年：
[1]. Kang S.B., Yang B., Zhang Y., Elchalakani M., Xiong G.* (2018). "Global Buckling of Laterally-Unrestrained Q460GJ Beams with Singly Symmetric I-Sections." Journal of Constructional Steel Research, 145, 341-351.
[2]. Kang S.B., Yang B., Zhou X., Nie S.D.* (2018). "Global buckling behaviour of welded Q460GJ steel box columns under axial compression." Journal of Constructional Steel Research, 140, 153-162.
[3]. Yang B., Shen L., Kang S.B., Elchalakani M., Nie S.D.* (2018). "Load bearing capacity of welded Q460GJ steel H-columns under eccentric compression." Journal of Constructional Steel Research, 143, 320-330.
[4]. Yang B., Wang H., Yang Y., Kang S.B.*, Zhou X.H., Wang L. (2018). "Numerical study of rigid steel beam-column joints under impact loading." Journal of Constructional Steel Research, 147, 62-73.
[5]. Yang B., Yang Y., Zhou X.H., Jiang Q.F., Kang S.B.* (2018). "Component tests and numerical simulations of composite floor systems under progressive collapse." Journal of Constructional Steel Research, 151, 25-40.
2017年：
[1]. Kang S.B.*, Tan K.H. (2017). "A Simplified Model for Reinforced Concrete Beam-Column Joints under Seismic Loads." Magazine of Concrete Research, 70(3), 138-153.
[2]. Kang S.B., Tan K.H., Liu H.Y., Zhou X.H., Yang B.* (2017). "Effect of boundary conditions on the behaviour of composite frames against progressive collapse." Journal of Constructional Steel Research, 138, 150-167.
[3]. Kang S.B., Tan K.H., Zhou X.H., Yang B.* (2017). "Influence of reinforcement ratio on tension stiffening of reinforced engineered cementitious composites." Engineering Structures, 141, 251-262.
[4]. Kang S.B., Tan K.H., Zhou X.H., Yang B.* (2017). "Experimental investigation on shear strength of engineered cementitious composites." Engineering Structures, 143, 141-151.
[5]. Kang S.B.*, Tan K.H. (2017). "Analytical study on reinforced concrete frames subject to compressive arch action." Engineering Structures, 141, 373-385.
[6]. Kang S.B.*, Tan K.H. (2017). "Progressive Collapse Resistance of Precast Concrete Frames with Discontinuous Reinforcement in the Joint." Journal of Structural Engineering, 143(9), 04017090.
[7]. Yang B., Nie S., Kang S.B., Xiong G.*, Hu Y., Bai J., Zhang W., Dai G. (2017). "Residual Stress Measurement on Welded Q345GJ Steel H-Sections by Sectioning Method and Method Improvement." Advanced Steel Construction, 13(1), 78-95.
[8]. Yang B., Kang S.B., Xiong G., Nie S.*, Hu Y., Wang S., Bai J., Dai G. (2017). "Experimental and numerical study on lateral-torsional buckling of singly symmetric Q460GJ steel I-shaped beams." Thin-Walled Structures, 113, 205-216.
[9]. Nie S.D., Kang S.B., Shen L., Yang B.* (2017). "Experimental and numerical study on global buckling of Q460GJ steel box columns under eccentric compression." Engineering Structures, 142, 211-222.
2016年：
[1]. Kang S.B.*, Tan K.H. (2016). "Analytical model for compressive arch action in horizontally-restrained beam-column sub-assemblages." ACI Structural Journal, 113(4), 813-826.
[2]. Kang S.B.*, Tan K.H. (2016). "Robustness Assessment of Exterior Precast Concrete Frames under Column Removal Scenarios." Journal of Structural Engineering, 142(12), 04016131.
[3]. Xiong G., Kang S.B., Yang B., Wang S., Bai J., Nie S.*, Hu Y., Dai G. (2016). "Experimental and numerical studies on lateral torsional buckling of welded Q460GJ structural steel beams." Engineering Structures, 126, 1-14.
[4]. Wang H., Yang B.*, Zhou X.H., Kang S.B. (2016). "Numerical analyses on steel beams with fin-plate connections subjected to impact loads." Journal of Constructional Steel Research, 124, 101-112.
[5]. Lee S.W.*, Kang S.B., Tan K.H., Yang E.H. (2016). "Experimental and analytical investigation on bond-slip behaviour of deformed bars embedded in engineered cementitious composites." Construction and Building Materials, 127, 494-503.
2015年：
[1]. Kang S.B.*, Tan K.H. (2015). "Bond-slip behaviour of deformed reinforcing bars embedded in well-confined concrete." Magazine of Concrete Research, 68(10), 515-529.
[2]. Kang S.B.*, Tan K.H., Yang, E.H. (2015). "Progressive collapse resistance of precast beam-column sub-assemblages with engineered cementitious composites." Engineering Structures, 98, 186-200.
[3]. Kang S.B.*, Tan K.H. (2015). "Behaviour of Precast Concrete Beam-Column Sub-assemblages Subject to Column Removal." Engineering Structures, 93, 85-96.
会议论文：
[1] Huang X.-J., Wang C.-Y., Wang S., Kang S.B. (2019). "Investigation on Dynamic Bond-Slip Behaviour between Steel Reinforcement and Concrete under High Loading Rate." 16th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC16), Brisbane, Australia.
[2] Wang S., Huang X. J., Kang S.B., Xu J.S. (2019). "Evaluation of Compressive Arch Action of Reinforced Concrete Beams." 16th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC16), Brisbane, Australia.
[3] Zhao P.Z., Yang B., Kang S.B. (2019). "Shear Transfer Mechanism in Engineered Cementitious Composites Subjected to Push-Off Loads." fib symposium 2019, Krakow, Poland.
[4] Li C., Wang C.Y., Zhao P.Z., Kang S.B., Long X. (2018). "Bond strength of embedded steel reinforcement at high strain rates." The International Federation for Structural Concrete 5th International fib Congress, Melbourne, Australia.
[5] Zhao P.Z., Kang S.B., Yang B. (2017). "Shear strength of engineered cementitious composites under push-off loads." 6th International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loads (PROTECT 2017). Guangzhou, China.
[6] Wang C.Y., Kang S.B., Dai G.X. (2017). "Influence of Compressive Arch Action on Progressive Collapse Resistance of Reinforced Concrete Structures." The Fifteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-15). Xi'An, Shaanxi, China.
[7] Tan K.H., Yang E.H., Kang S.B., Wahyudi T.Y. (2015). "Mechanical Behaviour of Engineered Cementitious Composites under Quasi-Static and High Strain Rate Applications." Proceedings of the 15th International Congress on Polymers in Concrete, Singapore.
[8] Kang S.B., Tan K.H., Yang E.H., Ng K.W. (2015). "Structural Behaviour of Precast Beam-Column Sub-Assemblages with Cast-In-Situ Engineered Cementitious Composites under Column Removal Scenarios." Proceedings of the Fifth International Conference on Design and Analysis of Protective Structures, Singapore.
[9] Kang S.B., Tan K.H., Yang, E. H. (2015). "Application of Engineered Cementitious Composites to Precast Beam-Column Sub-assemblage under Column Removal Scenarios." Proceedings of fib symposium 2015, Copenhagen, Denmark.
[10] Kang S.B., Tan K.H. (2015). "Behaviour of Exterior Precast Concrete Frames Subject to Column Removal." Proceedings of fib symposium 2015, Copenhagen, Denmark.
[11] Kang S.B., Tan K.H. (2014). "Experimental Study on Exterior Precast Concrete Frames under Column Removal Scenarios." Proceedings of the 6th International Conference on Protection of Structures against Hazards, Tianjin, China.

高等学校科学研究优秀成果奖二等奖（排名第三，2022年）
重庆大学自然科学奖二等奖（排名第三，2018年）
重庆大学优秀党务工作者（2021年、2023年）
重庆大学先进工作者（2024年）

在读硕士研究生15名
在读博士研究生7名（其中1人获得研究生国家奖学金，3人获得国家留学基金委资助赴新加坡南洋理工大学、奥地利维也纳工业大学和澳大利亚西澳大学联合培养）

电子邮箱：kang0119@cqu.edu.cn